| |
|
| What's new? (last 3 days) | Products(0) / Trade Leads(0) / Companies(0) |
|
|
| Sell:Pipe bend 2009/12/4 16:29:59 | | | Material:A234-WPB.A420-WPL6.A234-WP12.A234-WP11.A234-WP5.A403- WP304.A403-WP304L.A403- WP316.A403-WP316L etc. Bending Radius (R): R=2D 3D 4D 5D 6D 7D 8D 9D 10D Bending Angle:15o 30o 45o 60o 90o 135o 180o, also could manufacture according to the angles given by the clients. Straight Length(L): The le | | | From Cangzhou Honda Pipe Bends Co.,ltd Sales Department |  | | | | |
| |
| Sell:Supply SS bend 2009/12/4 16:29:42 | | | Material:.A403- WP304.A403-WP304L.A403- WP316.A403-WP316L etc. Bending Radius (R): R=2D 3D 4D 5D 6D 7D 8D 9D 10D Bending Angle:15o 30o 45o 60o 90o 135o 180o, also could manufacture according to the angles given by the clients. Straight Length(L): The length between two ends general from 300mm-1500mm | | | From Cangzhou Honda Pipe Bends Co.,ltd Sales Department | | | | | |
| |
| Sell:U bend 2009/12/4 16:17:40 | | | .
1.Name:U bend
2.Size: from 2" to 64"
Bending radius:2D-10D
Bending angle15 30 45 60 90 135 180 degree and also could manufacture according to the angles given by the clients.
3. Wall thickness: Sch5-Sch160,XXS
4. Standard: ISO, ANSI, JIS, DIN, GB, BS,EN, etc
5. Material: carbon | | | From Cangzhou Honda Pipe Bends Co.,ltd Sales Department | | | | | |
| |
| Sell:Elbow 2009/12/4 16:13:19 | | | 180 degree elbow
SIZE:1/2"-48"DN15-DN1200
NOMINAL WALL THICKNESS: Sch5-Sch160,XXS
STANDARDS : ISO. ANSI. JIS. DIN GB/T12459GB/T13401ASME B16.9SH3408
SH3409HG/T21635HG/T21631SY/T0501
USE: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc. | | | From Cangzhou Honda Pipe Bends Co.,ltd Sales Department | | | | | |
| |
| |
| |
| |
| |
|
| Our categories are built to suit you. Help us improve them! |
| |
|
|
|
|
|
|